RAIS/attika NEXO 100 GAS Installationsanleitung Seite 234

ARRANGING CERAMIC "LOGS" AND THE EMBERS LAYER
Procedure:
1. Start by securing two burners in the fireplace's
base plate (see the section Fitting secondary
burners for the detailed procedure).
3. Position log no. 2 as shown in the image. It
must not touch the thermocouple.
5. Position log no. 4 so that it rests on log no. 2
48 - GB
2
4
2. Position log no. 1 as shown in the image.
4. Position log no. 3 so that it rests on log no. 2
6. Position log no. 5 so that it rests on log no. 2
5
1
3