Reinitialising Usb Input Devices - G&D DP-Vision-IP-Fiber-Serie Installation Und Bedienung

Configuration

Reinitialising USB input devices

Once you connect a USB keyboard or mouse to the KVM extender, the input device
is initialised and can be used without restrictions.
The USB connection of some USB input devices needs to be reinitialised after a cer-
tain time. Activate the automatic reinitialisation of the USB input devices if a USB
keyboard or mouse no longer reacts to your inputs during operation.
How to enable/disable reinitialisation of USB input devices:
1. Press Ctrl+Num
2. Select the row
of the remote console (at the
Select the row
setting of the local console (at the
3. Under USB auto refresh
only faulty
all
off
4. Press F2 to save your settings.
53 · G&D DP-Vision-IP-Fiber
(default) to open the on-screen display.
Console setup and press
Local console setup
press
 The status of the USB devices is monitored.
If communication to a USB device is interrupted, this
device is reinitialised (default setting).
 All USB devices are reinitialised regularly.
 The connected USB input devices do not need to be
reinitialised.
Enter if you want to change this setting
CON module).
and press Enter
CPU module).
F8 to select one of the following options:
if you want to change this