Enabling Or Disabling Ddc/Ci Support - G&D DP1.2-Vision-CAT Installation Und Bedienung

Enabling or disabling DDC/CI support

The computer and user modules supported by the
to support monitors with
After the function has been activated, the DDC/CI information is transparently for-
warded to the monitor in order to support as many monitors as possible. However,
we cannot guarantee the support for all monitors.
How to configure the DDC/CI support of a user module:
1. Press
Ctrl+Num
2. Select the row
The Freeze mode is adjusted separately for each video channel of the user module. The
following options can be adjusted separately for each video channel of multi-channel
devices.
3. Under DDC/CI support
disabled
CPU > monitor
bidirectional
4. Press F2 to save your settings.
DDC/CI functionality.
(default) to open the on-screen display.
and press
Console setup
press F8 to select on of the following options:
 The transmission of DDC/CI signals is disabled (default).
 The transmission of DDC/CI signals is carried out
exclusively from the CPU to the monitor
 The transmission of DDC/CI signals is carried out by
bidirectionally.
DP1.2-Vision-CAT
.
Enter
G&D DP1.2-Vision-CAT · 40
Configuration
system are ready