Expanding Switchable Signals; Expanding The System Through Channel Grouping - G&D ControlCenter-Compact Serie Installation Und Bedienung

Expanding switchable signals

You can expand a computer's or a console's switchable signals either through chan-
nel grouping or stacking.
EXAMPLE:
computer, in addition to the
module (second video channel) and a
computer.
In addition to the
channel) and a
tioned computer is accessing.
With the DVICenter, you can switch various computer modules of one computer or
various user modules of one console at the same time.
To expand the switchable signals, you can use two different ways of connection:
 Channel grouping:
channel of a computer or console with up to seven additional video channels and a
USB or RS232 channel.
NOTE:
menu at the currently accessed computer. If you switch to another computer after
pressing the hold function, the USB signal remains on the computer that you
accessed first.
After disabling the hold function on the
the currently accessed computer.
 Stacking:
time. Connect multiple matrix switches to the
lite matrix switch for each additional user module of one console.

Expanding the system through channel grouping

The web application lets you assign up to seven additional video channels and one
USB 2.0 or RS 232 channel to the KVM channel of the console.
You can assign up to seven additional video channels to the KVM channel of the com-
puter, too. In addition, you can create a
channel.
NOTE:
multi-channel represent one single device. For computers such a channel repre-
sents a group of up to four devices.
Downloaded from www.Manualslib.com
To transmit a second video signal and a USB 2.0 signal of the same
DVI-CON user module, connect the
module (USB2.0/RS232) to the console, the aforemen-
U2-CPU
In the Config Panel web application, you can assign the KVM
Only in this mode, you can hold the USB signal using the OSD's
In Stacking mode, you can switch multiple matrix switches at the same
Within the channel groups of the console a USB 2.0/RS 232 channel or a
manuals search engine
computer module, connect a second
DVI-CPU
U2-CPU module (USB2.0/RS232) to the
Operation menu, the USB signal switches to
ports. Connect an additional satel-
Bus
pool of four devices for the USB 2.0/RS 232
G&D ControlCenter-Compact · 19
Expanding switchable signals
DVI-CPU
DVI-CON-Video (second video
Operation