Configuring Dynamic Ports; Automatic Port Mode; Special Features For Cascading A Matrix Switch - G&D ControlCenter-Compact Serie Installation Und Bedienung

Configuring dynamic ports

IMPORTANT:
information about the configuration of dynamic ports.
The different device variants of the ControlCenter-Compact series provide up to 80
dynamic ports for the connection of user modules and target modules.
NOTE:
the following paragraphs describe the configuration of the 32 ports of a Control-
Center-Compact-32C.

Automatic port mode

By default, the matrix switch detects the user modules (
connected to the ports and auto-configures the ports.
IMPORTANT:

Special features for cascading a matrix switch

By cascading a matrix switch, you can increase the number of connectable target
computers. For this, connect further matrix switches to the configured ports:
 Connect master matrix switches to
 Connect slave matrix switches to
2
1
By deault, the ports of the different variants of the ControlCenter-Compact series are
configured to connect both master and slave matrix switches:
Downloaded from www.Manualslib.com
The manual of the web application Config Panel provides detailed
The number of ports depends on ControlCenter-Compact variant.
Mind or change the port mode of a cascade.
4 6 8 10 12
3 5 7 9 11
manuals search engine
CON
.
up ports
.
down ports
Dynamic Ports
14 16 18 20 22
13 15 17 19 21
G&D ControlCenter-Compact · 13
Configuring dynamic ports
) or target modules (
CPU
24 26 28 30 32
23 25 27 29 31
)