Configuring The «Global» Network Settings - G&D ControlCenter-Compact Serie Installation Und Bedienung

Initial configuration of network settings
Operational
mode:
IP address:
Netmask:
Connection type:
7. Press
Configuring the «global» network settings
In complex networks, the global network settings ensure that the matrix switch is
available from all sub networks.
How to configure the global network settings:
1. Press
2. Press
3. Select the
4. Select the
5. Enter the following data in the
Global prefer-
ences
Hostname:
Domain:
Gateway:
DNS Server 1:
DNS Server 2:
6. Press
10 · G&D ControlCenter-Compact
Downloaded from www.Manualslib.com
Press F8
Network A
switches off network interface.
 Off:
 Static:
 DHCP:
Enter the interface IP address.
This setting is auto obtained in the DHCP operating mode.
Enter the network netmask.
This setting is auto obtained in the DHCP operating mode.
Press
F8
partner are to negotiate the connection type automatically
( Auto ) or select one of the listed types.
F2 to save your settings.
(default) to open the on-screen display of the KVM matrix system.
Ctrl+Num
to call the Configuration menu.
F11
entry and press
Network
entry and press
Settings
Select the operating mode by pressing
 Static: uses static settings.
 DHCP: auto obtains the settings described below from a
DHCP server.
Enter the matrix switch hostname.
Enter the domain the matrix switch is to belong to.
Enter the gateway IP address.
Enter the DNS server IP address.
Enter the IP address of another DNS server (option).
to save your settings.
F2
manuals search engine
to select the operating mode of the interface
or :
Network B
uses static settings.
obtains the settings from a DHCP server.
to define if the network port and its communication
.
Enter
.
Enter
paragraph:
Main Network
F8 :