G&D ControlCenter-Compact Serie Installation Und Bedienung Seite 54

Expanding the KVM matrix system by cascading
4. Select the
Auto:
Master:
Slave:
5. Press
18 · G&D ControlCenter-Compact
Downloaded from www.Manualslib.com
Cascade mode entry and press
The central module defines if it works in the master or slave mode.
In this operating mode, you can only connect user modules to
Dynamic Ports that are configured for the connection of target mod-
ules.
You can change the names of the connected target modules. The
changed names are automatically updated on the slave devices of the
cascade.
In this operating mode, you cannot change the names of connected
target modules. The names of the target modules are automatically
obtained from the master device.
F2 to save your settings.
manuals search engine
F8 to choose one of the listed options: