Initial Configuration Of Network Settings; Configuring Network Ports - G&D ControlCenter-Compact Serie Installation Und Bedienung

Initial configuration of network settings

Accessing the Config Panel web application and using the expanded network functions
requires you to configure the network settings of the matrix switch.
You can configure the network settings by using one of the new consoles.

Configuring network ports

A central module, which is integrated into the network, can only be addressed after
the network ports are configured.
NOTE:
 IP address of network interface A:
 IP address of network interface B: address obtained using
 global network settings: settings obtained using
ADVICE:
faces A and B.
After opening the on-screen display, press
and press
How to configure the settings of a network port:
1. After the console is switched on, the matrix switch asks you to log in. Enter the
following data to the login box:
2. Press
3. Press
4. Select the
5. Select the
6. Enter the following data in the
face Network B) section:
Downloaded from www.Manualslib.com
In the defaults, the following settings are pre-selected:
Use the information menu to retrieve the IP addresses of the network inter-
.
Enter
Username:
Enter the default username
Password:
Enter the default password
Enter to login and open the on-screen display.
F11 to call the Configuration
Network entry and press
Settings entry and press
manuals search engine
Initial configuration of network settings
192.168.0.1
DHCP
F12 , select the line
Admin.
4658 .
menu.
Enter .
Enter .
Interface A (interface Network A) or
G&D ControlCenter-Compact · 9
DHCP
Hardware information
Interface B (inter-
.