Herunterladen Inhalt Inhalt Diese Seite drucken

Removing The Slide-In Racks; Replacing The Oven Light Bulb - KKT KOLBE SET6309ED Benutzerhandbuch

Einbau-herdset
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Cleaning and maintenance
3.1
3. 3

Replacing the oven light bulb

The light used in oven is a special high temperature resis-
tant light (AC220 V, 25 W).
Um diese auszuwechseln, gehen Sie wie folgt vor:
To replace this, proceed as follows:
• Disconnect in the appliance from the power supply
(pull the plug or remove the fuse), because the socket
could be live.
• Turn the glass cover counterclockwise (4.1).
• Remove the light (4.2) and replace it with the same
type.
• Screw back the cover glass clockwise.
50
3. 2

Removing the slide-in racks

To facilitate cleaning of the oven side walls and the slide-
in rails, you can remove the slide-in grilles.
• Remove all accessories such as grate, baking tray and
telescopic pull-out rails.
• Slightly push down the hook in racks at the clamping
point as shown (3.1).
• Swivel the rack inwards to an angle of approx. 45°
(3.2-3.3).
• Unhook it at the top and carefully pull it out (3.3).
• To reinstall after cleaning, follow the steps above in
reverse order.
4.1
4. 2

Quicklinks ausblenden:

Werbung

Kapitel

Inhaltsverzeichnis
loading

Inhaltsverzeichnis