KKT KOLBE SET6309ED Benutzerhandbuch Seite 52

Installation
• The dimensions for the installation of the appliance can
be found in the following dimensional drawing (2.1-2.2).
Specifications in millimeters.
2.1
595
595
• Cut the hole out of the worktop as indicated (2.2).
To ensure safe use of the hob, you need at least 50 mm
of space around the hob.
Note: Before cutting out, check if the specified dimen-
sions match the dimensions on the product.
• For installation, the hob should rest on a stable, smooth
surface. (For example, use the packaging as a base).
Make sure that no pressure is exerted on the elements
protruding from the hob.
• Screw the 4 brackets to the base of the hob (3.1-3.2).
Adjust the position of the brackets according to the
thickness of the worktop.
• The power cable must be routed behind the appliance
so that it does not touch the rear wall of the oven.
• Insert the oven completely into the opening.
• Open the oven door and and fix the appliance to the
built-in furniture left and right with the screws supplied.
(2.1) While doing so, do not overtighten the screws.
52
554
2.2
559
512
21.5
3.1
3.2
600
564
600
Screw hole
Bracket
Glass
Glas
Bracket
Einbauklemme
Screw
Schraube
ST3. 5 8
ST3.5×8
Untergehäuse
Base
494
Screw
ST3.5×8
Base
Arbeitsplatte
Arbeitsplatte
Worktop