Operating Elements And Connections Of The Transmitter - Omnitronic IEM-500 Bedienungsanleitung

4.2 Operating elements and connections of the transmitter

1 Power on/off
Press this button 2 seconds to switch the transmitter on
or off.
2 LCD
Indicates all function of the transmitter (
4.2.1 Display on the transmitter).
3
Button SET
For calling the setting menu, for selecting the menu item,
and for confirming the adjustments made.
8 Power input
Plug in the connection cable of the supplied power unit
here.
9 Signal input LEFT
Combined jack for balanced connection of the left
channel of a stereo signal source (e.g. mixer, CD player)
via a XLR or 6.3 mm jack.
4 Buttons D and E
For switching over a function and for increasing (P) or
reducing (E) a value in the setting menu.
5 Level control INPUT LEVEL
For adjusting the input level.
s. section
6 Headphones input PHONES
6.5 mm jack for connecting stereo headphones.
7 Level control LEVEL
For adjusting the volume for headphones connected to
the jack PHONES.
10 Signal input RIGHT
Combined jack for balanced connection of the right
channel of a stereo signal source (e.g. mixer, CD player)
via a XLR or 6.3 mm jack.
11 Sliding switch PAD
For attenuating the input signals by 12 dB.
12 BNC input jack
Input for the supplied antenna.
22/32 00052812.DOC, Version 1.2