Description Of The Device; Front Panel; Rear Panel - Omnitronic UHF-500 Bedienungsanleitung

4. DESCRIPTION OF THE DEVICE

Front panel

1. Power ON/OFF
With the ON/OFF-switch, you can switch the device on and off.
2. Select Button
Selects display A or B.
3. Set Button
Set the channel or the frequency.
4. Up Button
Increase the display value.
5. Down Button
Decrease the display value.
6. Display
7. Volume-Control
Controls the output level to mixer or amplifier.
8. Antenna
Receives signals from the transmitter.

Rear panel

1. Antenna Connector A
2. MIX-output socket
Mixed output signal of channel A and B; for 6,3 mm stereo jacks, unbalanced.
3. Channel A and B output sockets
For 6,3 mm stereo jacks, unbalanced.
4. Channel A and B output sockets
For balanced 3-pin XLR-connectors.
5. Power supply
Plug in the adapter cable here.
6. Antenna Connector B
15/36 00024889.DOC, Version 1.2