Glossary - Definition - RADEMACHER RolloTube S-line Sun DuoFern Original - Betriebs- Und Montageanleitung

i

3.4 Glossary - Definition

Blockage detection / Obstacle detection
Tubular motor safety features.
If the awning is blocked or an obstacle is encoun-
tered, the tubular motor stops and automatically
travels briefly in the opposite direction.
Fabric relief / fabric tensioning
The strain on the awning fabric is automatically
relieved by briefly reversing after reaching the
respective end point.
The strain on the fabric is only relieved when
the top end point has been self-taught (awning
retracted).
The fabric tensioning function is active for the self-
taught and manual end point setting.
DIN EN 13659
"Shutters and external Venetian blinds - Performance
requirements including safety."
This standard determines the performance require-
ments that externally attached shutters and blinds
must fulfil. It also contains significant hazards with
regard to the design, transportation, installation,
operation and maintenance of these shutters and
blinds.
DIN VDE 0100, Part 701 and 702
"Erection of low voltage installations -
Part 7-701 and 7-702"
This standard defines the requirements for special
installations or locations, rooms with a bath or
shower / basin etc.
Torque monitoring
The torque monitoring protects the awning and the
complete system from being destroyed and people
from being injured. It is also used to find the end
points, amongst other things.
DuoFern
RADEMACHER radio technology for controlling
compatible products.
End points
An end point is defined and set for each direction
of travel of the awning. Once this point has been
reached, the tubular motor switches off and the
awning stops.
HomePilot®
The HomePilot® is a central controller unit for
RADEMACHER radio products.
Transient operation (KB)
Tubular motors are not designed for continuous
operation. Transient operation defines the maxi-
mum permissible running time.
Magnetic ring
The magnetic ring (14) s located in the area of the
drive head (6). It is driven by the awning shaft (11)
and the adapter (8) and is used to find the end
points, and monitor/control the shaft rotations in
normal mode.
42
Configuration of KNX/EIB actuators for
RADEMACHER tubular motors
◆ KNX/EIB actuators are used to control electrically
operated roller shutters, awnings etc.
◆ Some parameters must be set prior to commis-
sioning in order to ensure trouble-free operation.
Universal setting cable
RADEMACHER accessory for the specialist awning
firm to set the end points.
Type 4090-1
Item no. 9600 00 86
EN