First steps
Connecting the headset
Connecting the USB data cable
You can connect a standard USB data cable with a mini-B connector to the back
of your handset to connect the handset to a PC (¢ page 60).
¤
Remove the belt clip (if attached)
¢
(
page 12).
¤
Remove the battery cover
¢
(
page 11).
¤
Connect the USB data cable to
USB socket
16
After removing the plastic cover, you can connect a
headset to the left-hand side of your telephone with the
2.5 mm jack connector.
The headset volume corresponds to the settings for the
handset volume (¢ page 48).
After using the headset, replace the plastic cover to
enable optimum sound in speaker mode.
.
1
1