Listening In To An External Call; Changing The Name Of A Handset; Changing A Handset's Internal Number - Unify Gigaset S400 professional Bedienungsanleitung

Listening in to an external call

Prerequisite: The Listening In
must be activated.
You are conducting an external call. An
internal participant can listen in on this
call and take part in the conversation. All
the participants are made aware of addi-
tional listeners by a signal tone.
•
Activating/deactivating
listening in
Ï
¢ ¢
v
Telephony
Press to activate/deactivate the
§Change§
function (³ = on).
Internal listening in
The line is engaged with an external call.
Your screen will display information to
that effect. To listen in to the external call.
c
Press and hold the talk key.
You can listen in to the call. All participants
hear a signal tone. During this time, this
handset displays the
and it is not possible to dial another num-
ber from this handset.
Ending listening in
a
Press the end call key.
All participants hear a signal tone.
If the first internal participant presses the
end call key a, the handset that has "lis-
tened in" remains connected to the exter-
nal participant.
function
¢
Listening In
Conference message
Using multiple handsets

Changing the name of a handset

The names "INT 1", "INT 2" etc. are
assigned automatically on registration.
You can change these names. The name
must be no more than 10 characters. The
changed name is displayed in every hand-
set's list.
u
Open the list of handsets. Your
own handset is indicated by
s
Select handset.
Open menu.
§Options§
Rename
~
Enter name.
Press the display key.
§Save§
Changing a handset's internal
number
A handset is automatically assigned the
lowest free number when it is registered.
If all slots are occupied, number 6 is over-
written if this handset is in idle status. You
can change the internal number of all reg-
istered handsets (1–6).
u
Open the list of handsets. Your
own handset is indicated by
Open menu.
§Options§
Assign Handset No.
Select and press
r
Select number. Only numbers
that have not been assigned
are displayed.
Press the display key to save
§Save§
the input.
f
.
f
.
.
§OK§
43