Height Adjustment - Cor Level Montageanleitung

Height adjus tment
GB
4
Release the lever of the quick-release.
Loosen the quick-release by turning it anti-
clockwise until the vertical bar of the table top
support can be moved.
Now set to the desired height. Using the height
markings on the bar, you can set both table top
supports to the same height.
2x
Adjust the quick-release by turning it clockwise
so that the lever can only be closed by pressing
hard. In order to set the lever to a horizontal
end position, you have to make a fine adjust-
ment using the knurled washer.
4 1