Safety; Noise; Residual Risk; Personal Protective Equipment (Ppe) - Cor Level Montageanleitung

3.1 Noise

GB
The A-weighted equivalent continuous sound pressure level at the workstation of this system is
less than 80 dB (A).

3.2 Residual risk

The table is built according to the state of the art and recognised safety regulations. Nevertheless,
its use may result in hazards for the user or third parties.
It is forbidden:
• to remove covers and put protective devices out of operation,
• to continue to operate the table in the event of changes that impair safety,
• to put stress on overload protections beyond the permissible overload path,
• to manipulate or bypass protection devices.
Please note:
• Never remove safety devices or disable them by making changes to the system.
Faults which could impair safety must be rectified immediately.
Before disassembly or opening or before cleaning work, every movement of the machine must be
at a standstill and the mains plug must be disconnected.
• Never reach into the moving actuator of the table.
Reaching into moving actuators can result in crushing and pinching injuries.
Ensure that the actuator can move freely.
• Guarantee the stability of the table.
If the table does not have a secure footing, it can tip and there is a risk of it falling over.
Place the table on a level surface that can support it.

3.3 Personal protective equipment (PPE)

No protective equipment is required to operate the table. It is recommended to wear safety shoes
during operation, transportation and when lifting the table.
4 8
Residual hazards!
When handling the table, there are still residual hazards which could not be
eliminated by the design.

Safety

shoes