Assembly Of The Table Top - Cor Level Montageanleitung

Assembly of the table top

GB
3
4 0
To assemble the table top, leave the quick-re-
leases open and the tabletop in the lowest
position – then you can still align the support
precisely during assembly.
First adjust the supports by turning them so
that the slots align with the cross beam.
Lift the table top onto the table top supports
and first screw in one screw at each end wit-
hout tightening it firmly.
Align the supports by turning so that each slot
is positioned under a threaded socket.
Now screw in all the other screws and carefully
tighten all the screws.