Cor Level Montageanleitung Seite 54

Assembly of the cable tray
GB
6
7
5 6
To mount the cable tray, first screw 2 of the
4 hand screws with a few turns into the table
top. Place the control unit with all the cables
in the cable tray. Then slide the slots of the
cable tray over the 2 hand screws. Screw the
two remaining hand screws into the threaded
sockets provided. Now tighten all the hand
screws hand-tight.
Lay the mains cable through any of the opening
in the corners of the cable tray.