SCHUNK EOA 40 Montage- Und Betriebsanleitung Seite 50

Assembly
20
01.00 | ID no.: 1399631 | Assembly and Operating Manual | en | 1399698
Rotating switch "Gripping force"
Digital inputs "Opens gripper" and "Closes gripper" are de-
■
energized.
Remove the sealing plug (1).
Ø
Adjust the gripping force with the rotating switch (2). Use a
Ø
suitable slotted screwdriver, blade width at least 2 mm.
IMPORTANT! Do not exert any axial pressure on the rotating
switch axis.
Notice! The rotating switch "Gripping force" has four stop
positions.
Attach the sealing plug (1).
Ø
Item
100 (standard)
75
50
25
For further information please refer to the assembly drawing and
the wiring diagram on the CD.
Additional information on the connections of the components can
be found in the documentation on the CD,
Applicable Documents
Gripping force [%]
[ 5].
}
100
75
50
25