SCHUNK EOA 40 Montage- Und Betriebsanleitung Seite 45

01.00 | ID no.: 1399631 | Assembly and Operating Manual | en | 1399698
WARNING
Risk of injury due to unexpected movements!
If the power supply is switched on or residual energy remains in
the system, components can move unexpectedly and cause
serious injuries.
Before starting any work on the product: Switch off the power
•
supply and secure against restarting.
Make sure, that no residual energy remains in the system.
•
WARNING
Risk of injury from crushing and impacts!
Serious injury could occur during the base jaw procedure and
when breaking or loosening the gripper fingers.
Wear suitable protective equipment.
•
Do not reach into the open mechanism or the movement area
•
of the product.
WARNING
Risk of injury from sharp edges and corners!
Sharp edges and corners can cause cuts.
Use suitable protective equipment.
•
WARNING
Risk of burns through contact with hot surfaces!
Surfaces of components can heat up severely during operation.
Skin contact with hot surfaces causes severe burns to the skin.
For all work in the vicinity of hot surfaces, wear safety gloves.
•
Before carrying out any work, make sure that all surfaces have
•
cooled down to the ambient temperature.
WARNING
Risk of injury from objects falling during energy supply failure!
Electronic devices are not fail-safe. In case of an energy supply
failure, the gripping force decreases. As a consequence, it cannot
be guaranteed that the workpiece is held safely.
In case of an energy supply failure, it is the user's
•
responsibility to revert the drive into a safe state.
Basic safety notes
15