Product Overview; Getting Started; Initial Setup - Fora Diamond PRIMA Bedienungsanleitung

Blutzuckerüberwachungssystem

Inhaltsverzeichnis

Verfügbare Sprachen

PRIMA Owner's Manual

Introduction

Intended Use

This system is intended for use outside the body (in vitro

diagnostic use) by people with diabetes at home and by health

care professionals in clinical settings as an aid to monitoring

the effectiveness of diabetes control. It is intended to be used

for the quantitative measurement of glucose (sugar) in fresh

capillary and venous blood samples (from the finger, palm,

forearm, and upper arm). It should not be used for the diagnosis

of diabetes, or testing on newborns.

Professionals may test with capillary and venous blood sample;

home use is limited to capillary blood testing. Use only heparin

for anticoagulation of whole blood.

Test Principle

Your system measures the amount of sugar (glucose) in whole

blood. The glucose testing is based on the measurement of

electrical current generated by the reaction of glucose with the

reagent of the strip. The meter measures the current, calculates

the blood glucose level, and displays the result. The strength of

the current produced by the reaction depends on the amount

of glucose in the blood sample.