Transferring Data; Maintenance - Fora Diamond PRIMA Bedienungsanleitung

PRIMA Owner's Manual
• If using the device for the first time, the "---" icon appears when you
recall the test results or review the average result. This indicates
that there is no test result in the memory.
• Control solution results are NOT included in the day average.
Announcement of Memory Result by
Universal Tone
Only the most recent result that was saved can be announced
acoustically. If you press the M button to turn the meter on, you
first hear the Long-Beep which stand for power-on and then the
most recent result.
Only the average for the last 7 days is announced acoustically.
If the 7-day average cannot be calculated, three horizontal bars
are displayed. This is signaled acoustically with 3 Long-Beep
representing 3 zeroes.
Appendix

Transferring Data

Data Transmission Via USB Cable
i. Install the software on your computer
To download the Health Care Software System, please visit
the ForaCare Suisse AG, website: www.foracare.ch.
Follow the instructions to install the software on your
computer.
ii. Connect the device with your computer using a USB cable
Connect the cable to a USB port on your computer. With the
device switched off, connect the other end of the USB cable
to the device data port. "USb" will appear on the display,
indicating that the device is in communication mode. (s)
iii. Transfer data to your computer
Follow the software on-screen instructions to transmit data.
Results will be transmitted with date and time. Remove the
cable and the device will automatically turn off.
Important!
While the device is connecting to the PC, it will be unable to perform
a blood glucose test.

Maintenance

Changing Battery
When the device power is getting low., the "
with E-b, Error and low. (t)
To change the battery, do the following:
1. Press the edge of the battery cover and lift it up to remove
the cover.
2. Remove the old battery and replace with one 1.5V AA size
alkaline battery.
3. Close the battery cover.
If the battery is inserted correctly, you will hear a "beep"
afterwards.
RISK OF EXPLOSION IF BATTERY IS REPLACED
EN-8
" icon appears
CAUTION