Care And Maintenance; Cleaning The Housing; Cleaning The Grease Filters - hanseatic SY-103D5-E7-C59-L52-900 Gebrauchsanleitung

Care and maintenance

WARNING
Risk of injury!
■ Before cleaning the exhaust hood or
changing the fi lter, pull out the mains
plug. If the mains plug is diffi cult to
access, switch off the corresponding
fuse or pull it out.

Cleaning the housing

CAUTION
Fire hazard!
Improper handling of the appliance
or incorrect maintenance can result in
grease residue catching fi re.
■ Grease residue on the exhaust hood
or in the grease fi lters can catch fi re
if exposed to high temperatures. For
this reason, clean the surfaces of the
exhaust hood and grease fi lters reg-
ularly.
We recommend cleaning the surfaces of the
exhaust hood after every use.
• Clean the glass surfaces with standard
glass cleaner.
• Wipe the other surfaces with a soft, damp
cloth and a little dishwashing detergent.
Do not use any sharp objects or scouring
powders, as these can scratch the sur-
face.
• Clean the glass surfaces with standard
glass cleaner.
Care and maintenance

Cleaning the grease filters

NOTICE
Risk of damage to property!
■ Handle the grease fi lters carefully to
avoid bending or creasing the fi ne
mesh.
■ Only reinsert the grease fi lters after
cleaning once they are fully dry.
Clean the grease filters once a month – or
more frequently if necessary – in the dish-
washer (up to 60°C), or in warm water with
detergent.
1. Switch the appliance on as described in
the section „Switching on the appliance"
(see page EN-15).
2. Remove the mains plug from the socket,
or switch off the mains supply using the
corresponding circuit breaker.
3. Open the locks (9) on the grease fil-
ter (10) and carefully remove the grease
filter (10).
4. Wash the grease filters (10) in a dish-
washer or in the sink as you would with
ordinary dishes.
Page EN-17
(10)
(9)