GF Signet 9900-1BC Produktanleitung Seite 26

Specifi cations
Standards and Approvals
CE, UL, CUL
RoHS compliant
Manufactured under ISO 9001 for Quality,
ISO 14001 for Environmental Management
and OHSAS 18001 for Occupational
Health and Safety.
China RoHS (visit gfsignet.com for details)
This device complies with Part 15 of
the FCC rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful
interference, and
(2) This device must accept any
interference received, including
interference that may cause
undesired operation.
Input Specifi cations
Digital (S L) ............... Serial ASCII,
3
Frequency:
Sensitivity .............. 80 mV @ 5 Hz,
Range ................... 0.5 Hz to 1500 Hz @
Accuracy ............... ± 0.5% of reading max
Resolution .............1 μs
Repeatability .........± 0.2% of reading
Power Supply
Rejection ...............No Effect ± 1 μA/V
Short Circuit ..........Protected
Reverse Polarity ...Protected
Update Rate ..............(1/frequency) + 150 ms
26 9900-1BC Batch Controller Manual
TTL level, 9600 bps
gradually increasing
with frequency
TTL level input for
open collector
error @ 25 °C
Output Specifi cations
One 4 to 20 mA output
Current Loop Out .... ANSI-ISA 50.00.01
Span ........................ 3.8 to 21 mA
Zero ......................... 4.0 mA factory set;
Full Scale................. 20.00 mA factory set;
Accuracy ................. ± 32 μA max. error
Resolution ............... 6 μA or better
Temp. Drift ............... ± 1 μA per °C
Pwr Sply Rejection .. ± 1 μA per V
Isolation ................... Low voltage
Voltage .................... 10.8 to 35.2 VDC
Max. Impedance ..... 250 Ω @ 12 VDC
Update Rate ............ 150 mS nominal
Short circuit and reverse polarity protected
Adjustable span, reversible
Error Condition ........ Selectable error condition
Actual update rate ... Determined by
Test Mode ................ Increment to
OC Outputs ............. 1
Analog Outputs ....... 1 passive
Linear scaling
Class H
user programmable
from 3.8 to 4.2 mA
user programmable
19.0 to 21.0 mA
@ 25 °C @ 24 VDC
(< 48 VAC/DC)
500 Ω @ 18 VDC
750 Ω @ 24 VDC
3.6 or 22 mA or NONE
sensor type
desired current
(range 3.6 to 21.00 mA)