System-Setup - GF Signet 9900-1BC Produktanleitung

System Setup
ENTER
NOTE: Example only. Your display may be different.
14 9900-1BC Batch Controller Manual
3s
Edit
or or
(Password may
ENTER
be required)
Input Edit
Input Edit Choices
The menu is constructed in a loop,
so you can move forward and
backward to select an item.
After any item is edited, the display
will return to the selected item.
(Password may
be required)
+
Or
2x
Return to
View Mode
System Setup: Menu Navigation
This basic operating procedure repeats
throughout the 9900 program:
1. Press ENTER for 3 seconds to enter
EDIT menu.
2. Press ► to move to a specifi c menu item.
3. Press ENTER key to select the item for
editing.
4. Press ▲ or ▼ to edit the value/selection.
5. Press ENTER to store the new value/
selection.
6. Press ▲+▼ to select another menu item.
Repeat steps 3-5 as required.
7. Press ▲+▼ again to return to normal
operation.
NOTE:
The 9900 displays the BATCH
instrument type ONLY if the
Remote Batch Module is installed.
ENTER
or
Saves Changes
Or
Select another
Menu Item