Option Menu - GF Signet 9900-1BC Produktanleitung

OPTION Menu

Contrast Adjust the LCD contrast for best viewing. A setting of 1 is lowest
contrast, 5 is highest. In general, select lower contrast if the display is in warmer
surroundings. Default = 3.
Backlight Adjust backlight level. Select OFF, LOW, HIGH or AUTO.
Default = AUTO.
Batch Decimal Set the decimal to the best resolution for your application. The
display will automatically scale up to this resolution. Select -----., ----.-, ---.-- or
--.---. Default = ----.-.
Total Decimal Set the decimal to the best resolution for the Permanent Totalizer
display. The display will automatically scale up to this resolution. Select -----.,
----.-, ---.-- or --.---. Default = ----.-.
PWD REQUIRED requires password to reset TOTALIZER, BATCH OVERRIDE,
SOURCE VOLUME reset, and BATCH COUNT reset. Select YES/NO.
(Does not affect Permanent Totalizer.) Default = YES.
Source Volume Selects SOURCE VOLUME display option. Choose ON or OFF.
Default = OFF.
Volume Reset If SOURCE VOLUME is ON, set the reset value for the source
volume. Default = 1000 GAL.
Bar Graph Source If SOURCE VOLUME is ON, select source for Bar Graph
(choose BATCH VOLUME or SOURCE VOLUME). If SOURCE VOLUME is
OFF, Bar Graph source is the batch volume. Default = BATCH VOLUME.
Password Type Select STD or CODE. Default = STD.
Set Code If CODE is selected in PASSWORD TYPE, enter desired password
code. 4-character entry not displayed, ---- displayed instead.
Memo Enter 13-character string, if desired.
Remote Setup Enables Remote Setup to confi gure the 9900 via a computer
and the 0252 Confi guration tool. Press ► and select YES to enable.
REMOTE SETUP flashes when mode is enabled.
Refer to the 0252 Configuration Tool manual, 3-0252.090, included with your PC
COMM tool.
Version Level Displays Transmitter Generation.
Batch Module (3-9900.397) requires Generation II, or later, 9900 transmitter.
22 9900-1BC Batch Controller Manual