Warranty Information; Product Registration; Safety Information - GF Signet 9900-1BC Produktanleitung

Warranty Information

Refer to your local Georg Fischer Sales offi ce for the most current warranty statement.
All warranty and non-warranty repairs being returned must include a fully completed
Service Form and goods must be returned to your local GF Sales offi ce or distributor.
Product returned without a Service Form may not be warranty replaced or repaired.
Signet products with limited shelf-life (e.g. pH, ORP, chlorine electrodes, calibration
solutions; e.g. pH buffers, turbidity standards or other solutions) are warranted out of
box but not warranted against any damage, due to process or application failures
(e.g. high temperature, chemical poisoning, dry-out) or mishandling (e.g. broken glass,
damaged membrane, freezing and/or extreme temperatures).

Product Registration

Thank you for purchasing the Signet line of Georg Fischer measurement products.
If you would like to register your product(s), you can now register online in one of
the following ways:
• Visit our website www.gfsignet.com.
Under Service and Support click on Product Registration Form.
• If this is a pdf manual (digital copy),

Safety Information

• Follow instructions carefully to avoid personal injury.
• This unit is designed to be connected to equipment which can be hazardous to
persons and property if used incorrectly. Read and understand all associated
equipment manuals and safety warnings before using with this product.
• Remove power to unit before wiring input and output connections.
• Wiring connections to this product should only be performed by qualifi ed personnel.
• Do not use unit if display is cracked or broken.
Caution / Warning / Danger
Indicates a potential hazard. Failure to follow all warnings
may lead to equipment damage, injury, or death.
Electrocution Danger
Alerts user to risk of potential of injury or death via
electrocution.
Electrostatic Discharge (ESD)
Alerts user to risk of potential damage to product by ESD.
Note / Technical Notes
Highlights additional information or detailed procedure.
2 9900-1BC Batch Controller Manual
click here