Operation / Ventilation - GUTMANN Nivel Bedienungsanleitung

OPERATION / VENTILATION

The functions of the NIVEL trough ventilation are controlled via a touch control panel.
The control unit has 3 fan output levels and one intensive level, as well as a room venti-
lation interval cleaning function.
A Selecting the ON / OFF symbol switches the device ON.
Fan stages 1-2-3-Int. are ready for operation.
Device ON = Symbol backlit, press again device OFF
B Fan power levels 1-2-3 by pressing the respective power level, it becomes
active and starts somewhat delayed. Press power level again.
The active power level is backlit.
C Intensive level
Int.
Press the Int symbol to activate the intensive stage (max. fan output). The motor
automatically switches back to the previously active stage after approx. 3 minutes .
The active power stage is backlit.
D Air cleaning interval
By pressing the symbol the fan becomes active in the smallest fan stage for
~10min. / hour and serves to improve the room climate. The function can also
be activated when the extractor fan is OFF.
The active air cleaning interval is backlit, press again deactivates this function.
E Grease filter cleaning
1
If the grease filter indicator ( E ) flashes, the condensation filter must be
cleaned. After cleaning the filter, reinsert the filter and reset the grease filter
display. Press and hold symbol "1" for at least 3 seconds, symbol "1" no longer
flashes. To reset the grease filter display, the hood must be in "ON" mode.
The grease filter display is activated after max. 40 operating hours.
NOTE:
Most of the buttons shown are only visible after switching on.
OPERATING INSTRUCTIONS
EN
31