General Function; Product Description; Operation Via Remote Control - GUTMANN Capa Bedienungsanleitung

that no objects are resting on them. Also
make sure that all plug connections are
securely inserted. Faulty shielding or
wiring poses a health hazard (electric
shock) and can destroy other appli-
ances. Appliances with mains plugs are
fitted with a safety-tested mains cable
for the respective country of use and
may only be connected to a correctly
earthed safety socket. Otherwise, there
is a risk of electric shock. Make sure
that the socket on the appliance or the
domestic safety socket is easily accessi-
ble so that the mains cable can be un-
plugged from the socket in an emer-
gency or during servicing and mainte-
nance work.
Danger of electric shock!
Do not clean the hood with a steam
cleaner or water pressure cleaner. The
hood must be disconnected from the
power supply prior to cleaning.

General Function:

The extractor hood was developed spe-
cifically for extraction of cooking vapours
in private homes. The rising cooking
vapours are caught by the extractor
hood and extracted via metal filters. The
metal filters are inserted flush at the
centre of a dark glass panel for optical
reasons; they are held in the hood body
with magnets. The resulting extraction is
centrally guided over the metal filters. It
is highly efficient. Accessibility of the
metal filters is ensured without any prob-
lems from the bottom of the hood. com-
bined with glass elements
tion performance is controlled via the
control panel. For some hoods, the con-
trol panel controls not only the lighting,
but also additional functions. Cooking
hob lighting is provided by several halo-
gen spots aligned behind a glass pane.
For hygienic reasons, the extractor hood
is made from stainless steel

Product description

1 Upper hood
2 Lower hood
3 Metal filter
4 Recirculation opening
5 Halogen lighting
6 Glass front, at the bottom of the hood
.
The extrac-
Instruction Manual
The functions of the hood as well as the
power level of the external motor can be
controlled in two different ways:

1. Operation via remote control

(recommended)
2. Operation via switch
Operation via Remote Control
1
2
3
ON/OFF
To switch on, press the field with the
ON/OFF symbol. The fan runs at the 3.
level. To switch off, press the ON/OFF
symbol again.
en
4
5
6
11