Operation; Cleaning And Care - GUTMANN ABAJO Bedienungsanleitung

en

Operation

The hood is operated via touch controls
(some pressure required). The opening
of the vent (extraction opening) is con-
trolled manually. When the vent is
moved downwards, the electronics are
connected to the electricity supply. The
integrated electromagnet is activated
and keeps the vent down.
The indirect LED illumination is switched
on automatically.
The closing of the vent is controlled
electrically by pressing the vent symbol.
Once the vent is closed, the hood no
longer consumes any energy. (0 watt
standby)
A C
A Setting 1
When this symbol is pressed, the fan
runs at 50%.
B Setting 2
When this symbol is pressed, the fan
runs at full speed.
C After-run
When this symbol is pressed, the after-
run is activated. The motor switches
from setting 2
1 and switches off automatically after
15 minutes.
D Closing the vent
When this symbol is pressed, the elec-
tricity supply to the hood is disconnected
and the vent closes automatically.
10
D B
back to setting
E LED illumination
When the vent is opened, the LED illu-
mination switches on automatically. This
can be switched off at any time using a
separate switch.

Cleaning and care

Cleaning the surfaces
Danger due to electric shock! Discon-
nect the extractor hood from the power
supply by pulling the plug out of the
socket or by switching off the fuse. Dur-
ing cleaning, make sure that no water
penetrates the device or comes into
contact with the electronic components.
Timely cleaning of the surface saves the
later laborious removal of stubborn con-
tamination. Only use conventional deter-
gents or universal cleaning agents for
cleaning suitable for stainless steel/
aluminium. Never use abrasive cleaning
agents or steel wool. After cleaning the
hood, treat the stainless steel surfaces
with a stainless steel care product.
These grease deposits occur for physi-
cal reasons and are not due to a mal-
function of the hood. Please clean here
regularly to avoid severe soiling.
Note: Do not use alcohol (spirits) on
plastic surfaces,
may result.
E
as dull spots