Operation By Remote Control - GUTMANN FLOTAR 9200EM Bedienungsanleitung

EN
OPERATING INSTRUCTIONS
Operation via remote control
ON / OFF (1)
To switch on, press the field with the ON / OFF symbol. Fan runs in level 1. The first
two LEDs light up Press the ON / OFF symbol again to switch off.
The filter saturation indicator is also reset by pressing the key (~10 sec.) until the red
LED turns off.
Increase fan capacity (2)
Press the Increase fan power icon. The fan power increases by one power level each
time the button is pressed.
Reduce fan power (3)
Press the Reduce fan power icon. The fan power decreases by one power level up to
power level 1 with each press.
Illumination (4)
Press the button with the light icon to turn on the light. Press the button again to turn
off the backlight. If the lighting symbol is held down for a longer time, the lighting is
dimmed.
Colour temperature setting
The colour temperature of the LED lighting can be infinitely ad-
justed between 2700K and 6500K.
Press and hold the delay button (6) to adjust, the LEDs start to
change the colour temperature. When the desired setting is
reached, release the button, the colour setting is saved.
int
Intensive level (5)
The maximum fan output is reached by pressing the Intensive
level button. The fan power switches back by one power level
after 5 minutes.
Automatic follow-up time (6)
Touching the field with the follow-up time symbol (2nd symbol
from left) activates the automatic follow-up time, the follow-up
time symbol flashes. The cooker hood switches back from level
3 to level 1 and continues to run there for ~15 minutes before
switching off.
Note: If the RC functions are limited or not available please
check battery capacity first.
21