Install The Server Into A Populated Rack - Sun Microsystems Sun Fire V480 Handbuch

3. Use six 10-32 screws, two screws and the mounting screw on each side, to secure
the server to the vertical mounting rails.

Install the Server Into a Populated Rack

Attach the mounting brackets to the chassis using three M4 screws for each bracket.
See "Attach the Mounting Brackets to the Chassis" on page 22 for instructions.
1. Slide the server into the open position in the rack.
Allow six rack unit spaces (10.5 in/26.67 cm) per server.
en-26 Sun Fire V480 Server Setup and Rackmounting Guide • February 2002