Setup Procedures - Sun Microsystems Sun Fire V480 Handbuch

3
C H A PT E R

Setup Procedures

This chapter tells you how to install the cable management arm, and connect the
power cords and an Ethernet cable.
When you have completed the procedures in this chapter, you are ready to set up a
system console, power on the server, install the Solaris operating environment, and
install the online documentation. See the Sun Fire V480 Server Quick Start Guide or
Part One of the Sun Fire V480 Server Administration Guide for information about these
procedures. Make sure that you have installed the Sun Fire V480 server into a 4-post
cabinet or 2-post rack (see Chapters 1 and 2) before following the instructions in this
chapter.
This chapter contains the following procedures and information:
"Inventory for Setup Procedures" on page 30
"Install the Cable Management Arm" on page 30
"Connect the Power Cords" on page 34
"Connect a Twisted-Pair Ethernet Cable" on page 37
"Restore the Cabinet" on page 39
en-29