Sun Microsystems Sun Fire V480 Handbuch Seite 36

4. Locate the cable management bracket on the opposite set of rails.
5. Align the vertical captive screws of the cable management arm with the
corresponding holes in the cable management bracket.
6. Tighten the two captive screws of the cable management arm to the cable
management bracket using a Phillips No. 2 screwdriver.
Cable management
bracket
7. Secure cables to the cable management bracket using the provided velcro straps.
Leave enough slack in the cables so that the server can easily slide in and out of the
cabinet.
en-32 Sun Fire V480 Server Setup and Rackmounting Guide • February 2002