First Use; Personalisation - Electrolux EWN 148640 W Benutzerinformation

6 electrolux

FIRST USE

• Ensure that the electrical and water
connections comply with the installa-
tion instructions.
• Remove the polystyrene block and
any material from the drum.
• Before the first wash, run a cotton cy-
cle at the highest temperature with-

PERSONALISATION

Choose the language
When switching on the appliance for the
first time, by turning the programme selec-
tor dial ( 1 ), you must set the desired lan-
guage. When you switch the appliance on
again all messages appear in this language.
Important!
If the display doesn't show any language,
the appliance has already been switched on
once. In such case, if you want to change
the language setting, press at the same
time the buttons 3 and 4 for about 6 sec-
onds to activate the menu language. Press
the buttons 5 (Up
all the available languages. Press the button
6 twice to confirm your choice.
Set the time ( Time )
After the desired language you must set the
time before the first wash.
Remember to change the setting time in ac-
cordance with daylight-savings time or solar
time.
The clock setting permits you to modify/set
up the current time. It is important to keep it
updated as the current END Cycle Time de-
pends on it.
With a short/single time pressure of the but-
tons 5 , the time varies minute by minute.
With a continue pressure of the same but-
tons, the time varies 10 minutes by 10 mi-
nutes. Press the button 6 to fix the current
time.
Important!
If the appliance has already been switched
on once, press the buttons 5 to activate the
Option menu.
By pressing again the same buttons you
can move through all the available options
till when you locate the setting menu ( Set-
tings ).
Press the button 6 to have access in the
menu. Press the buttons 5 to scroll all the
or Down ) to scroll
out any laundry in the machine, to re-
move any manufacturing residue
from the drum and tub. Pour 1/2 a
measure of detergent into the main
wash compartment and start the ma-
chine.
settings till time setting position appears
and press button 6 to confirm your choice
and then set the clock.
Customize your appliance
This appliance is provided with a setting
menu that allows you to modify the factory
settings as you want.
When you switch the appliance on, by turn-
ing the programme selector dial ( 1 ), press
the buttons 5 to activate the Options menu.
By pressing again the same buttons you
can move through all the available options
till when you locate the setting menu. Press
the button 6 to have access in the menu.
Press again buttons 5 to scroll all the set-
tings and press the button 6 to confirm
your choice.
Set the sound volume ( Volume )
The volume setting permits you to modify
the volume of the sound. Press the buttons
5 to choose between different volume levels
from 0 to 9 (0 = no sound; 9 = max.).
Press the button 6 to confirm your choice.
Enable the child safety lock ( Child Lock )
Your appliance is provided with a CHILD
SAFETY LOCK, which allows you to leave
the appliance not supervised with the door
closed without having the worry that chil-
dren might be injured by or cause damage
to the appliance.
Set this option before pressing the button 7
and after having selected the required wash-
ing programme.
This function remains enable also when the
appliance is not working.
Set the child safety lock:
• press the buttons 5 to activate the op-
tions menu
• press the buttons 5 up or down to set
the child safety lock