Acoustic Signals; Before First Use; Daily Use; Loading The Laundry - Electrolux EWF 1484 EDW Benutzerinformation

12 www.electrolux.com
• Before you press
8.2 Permanent Extra Rinse
With this option you can permanently have
an extra rinse when you set a new
programme.
• To activate/deactivate this option

8.3 Acoustic signals

The acoustic signals operate when:

9. BEFORE FIRST USE

1. Put 2 litre of water in the detergent
This activates the drain system.
2. Put a small quantity of detergent in the
3. Set and start a programme for cotton

10. DAILY USE

10.1 Loading the laundry

1. Open the appliance door
2. Put the laundry in the drum, one item
3. Shake the items before you put them
Make sure not to put too much laundry in
the drum.
4. Close the door.
Downloaded from www.Manualslib.com
: the appliance
cannot start.
press and at the same time
until the indicator comes on/goes
off.
compartment for washing phase.
compartment for washing phase.
at the highest temperature without
laundry.
WARNING!
Refer to Safety chapters.
at a time.
in the appliance.
manuals search engine
• The programme is completed.
• The appliance has a malfunction.
To deactivate/activate the acoustic
signals, press and
time for 6 seconds.
If you deactivate the acoustic
signals, they continue operate
when the appliance has a
malfunction.
This removes all possible dirt from the
drum and the tub.
CAUTION!
Make sure that no laundry stays between
the seal and the door. There is a risk of
water leakage or damage to the laundry.
at the same