Electrolux EWN 148640 W Benutzerinformation Seite 26

26 electrolux
4. Unscrew and remove the two large rear
bolts B and the six smaller bolts C .
C
5. Remove the bracket D and tighten up
the six smaller bolts C .
D
A
C
B
B
6. Open the porthole, take out the inlet
hose from the drum and remove the pol-
ystyrene block fitted on the door seal.
7. Fill the smaller upper hole and the two
large ones with the corresponding plas-
tic plug caps supplied in the bag contain-
ing the instruction booklet.
C
C