Unilateral Modification And Spare Parts Manufacturing; Unproven Usage; Scope Of Delivery; Application - Conel FLOW Betriebsanleitung

Unilateral modification / Unproven usage / Scope of delivery / Application

1.3 Unilateral modification and spare parts manufacturing

Modifications or changes to the unit/installation should only be carried out after
consultations with the manufacturer. Original spare parts and accessories authori-
sed by the manufacturer are essential for compliance with safety requirements. The
use of other parts can invalidate any claims for warranty or compensation.

1.4 Unproven usage

The operating safety of the unit is only guaranteed provided that the unit is used in
accordance with this operating instructions. The limit values given hereafter
should under no circumstance be exceeded. These operation instructions do not
supersede or exclude the following of generally valid regulations and standards.

2. Scope of delivery

Submersible pump, ready for plugging in, with 10 m cable with Europlug, built-in
moisture sensor level control, non-return valve, 1¼" pressure outlet connector with
female thread, and hose adaptor with ¾" male threaded and 1" and ¾" push-on
connections.

3. Application

FLOW F series submersible pumps are suitable for pumping clear water (solids pas-
sage 1 mm). The pumps may not be used to pump corrosive, flammable, gaseous
or potentially explosive fluids, sewage containing faecal matter, or fluids containing
sand or other abrasive substances.
The noise emission value is less than 70 dB (A).
17