Ottobock Kenevo Protector 4X840 Gebrauchsanweisung (Benutzer Seite 8

2.2 Function
The protective cover provides a means of enclosing the Kenevo electronic knee joint, including
the tube adapter, to enhance its appearance and function. The housing of the knee joint is protec­
ted against external influences by the protective cover, e.g. scratching and surface contamination.
The protective cover is not required for the proper and safe functioning of the joint.
2.3 Combination Possibilities
Prosthetic components that are suited for combination with the product are listed below.
Knee Joint Combination Possibilities
Designation
Kenevo
3 Application
3.1 Indications for use
The housing of the knee joint is protected against external influences by the protector, e. g.
scratching and surface contamination.
3.2 Area of Application
The product is intended exclusively for wearers of the Kenevo knee joint.
3.3 Conditions of use
The product was developed for everyday use and must not be used for unusual activities such as
extreme sports (free climbing, paragliding, etc.).
4 Safety
4.1 Explanation of Warning Symbols
Warning regarding possible risks of accident or injury.
CAUTION
NOTICE Warning regarding possible technical damage.
4.2 Structure of the safety instructions
CAUTION
The heading describes the source and/or the type of hazard
The introduction describes the consequences in case of failure to observe the safety instruc­
tions. Consequences are presented as follows if more than one consequence is possible:
> E.g.: Consequence 1 in case of failure to observe the hazard
> E.g.: Consequence 2 in case of failure to observe the hazard
This symbol identifies activities/actions that must be observed/carried out in order to avert
►
the hazard.
4.3 General Safety Instructions
NOTICE
Changes or modifications to the product made independently
Damage to the product.
► Have any changes or modifications to the product carried out only by authorised, qualified
personnel.
8 | Ottobock
Reference number
3C60/3C60=ST