Saving And Recalling Settings - WIKA CPH65I0 Betriebsanleitung

6. Commissioning, operation
When the "LOCK CFG" option is chosen, the menu display returns home and the
"CONFIG" option on the main menu indicates that it is locked. Also, all other menus are
locked with the exception of the "CONTRAST" and "UNLOCK CFG" menus. When the
GB
"UNLOCK CFG" option is chosen, the configuration is unlocked and the menu display
continues to the next submenu.

6.4.3 Saving and recalling settings

The calibrator automatically saves the current setting for recall on power-up. In addition,
five settings can be accessed through the "SETUPS" menu. Select the "SETUPS"
option from the submenu.
"SAVE" to save the setting, "RECALL" to recall the setting or "DONE" to return home.
If "SAVE" or "RECALL" is selected, use the arrow keys to select the setting location.
Then use the "SAVE" option to store the current setting into the selected location or the
"RECALL" option to recall the setting stored in the selected location. The display menu
will automatically return home.
6.4.4 Setting auto shut-off parameters
The calibrator will switch itself off after a specified time; this function can also be
deactivated. Use the "AUTO OFF" option to set the auto shut-off parameters.
26 WIKA operating instructions, model CPH65I0