WIKA CPH65I0 Betriebsanleitung Seite 28

6. Commissioning, operation
6.4.6 Reduced screen resolution
Due to the high accuracy of the CPH65I0, the measured value is displayed with a higher
resolution. In some cases, this is a disadvantage. For this, the CPH65I0 has a function
GB
for lowering the display resolution. This function removes the last digit.
In order to switch the function on or off, perform the following:
With the calibrator switched on, press the F3 key in order to activate the "MORE"
option. Press the "NEXT" key until "RESOLUTION" appears in the left-hand text field.
Then press the F1 key to activate the function.
Select "ON" or "OFF" in order to switch the lower display resolution on or off.
Use "DONE" in order to return to the home menu.
6.4.7 Setting the resistance thermometer probe
Use the "PROBE TYPE" option of the 'RTD Probe Type' main menu to access the
menu for resistance thermometer probe selection.
There are four types of resistance thermometers: "P100-385", "P100-392",
"P100-JIS" and "CUSTOM". With "CUSTOM", custom resistance thermometers
can be selected. Use the "SELECT" option to select the desired probe type and the
"DONE" option to store the change and return home.
28 WIKA operating instructions, model CPH65I0