Preliminary Checks; Safety Symbols And Definitions; Symbol Description - Huntleigh Smartsigns LITE Serie Kurzes Handbuch

HEALTHCARE
Remove or disconnect the battery if the device is not to be used for a
prolonged time.
Dispose of the battery in accordance with local regulations. Do not
incinerate.
The USB port on the Smartsigns® LITE Series is susceptible to electrostatic
discharges (ESD). Precautions should be taken when using the USB cable
with the device, including turning off the device and not taking any
measurements while the USB cable is being installed or removed.
A troubleshooting guide is included in this manual. Please consult that
section if an error or question arises regarding the operation of the
Smartsigns® LITE Series.
1.2

Preliminary Checks

Huntleigh Healthcare takes every precaution to ensure that their goods
reach you in perfect condition. We recommend that a thorough visual
inspection is made prior to installation. Should any damage be evident or
any parts missing, ensure that Huntleigh Healthcare, Diagnostic Products
Division are informed at once.
1.3

Safety Symbols and Definitions

The following symbols are used on the Smartsigns® LITE Series device,
and their definitions are described below: -
Symbol
Description
Class II electrical equipment.
Type BF applied part, with defibrillator Protection.
Attention, consult accompanying documents for further
information.
Power symbol, showing that DC power with the specified
polarity should be used with the Smartsigns® LITE Series. Only
the specified power supply should be used with the device.
Device malfunction. Consult the Error Messages and
Troubleshooting section.
9