Maintenance; Replacing The Battery (Sl500-Bat/Sl510 Only); Storage And Disposal Requirements - Huntleigh Smartsigns LITE Serie Kurzes Handbuch

HEALTHCARE
7.3

Maintenance

Huntleigh Healthcare recommends that preventative maintenance checks
are carried out at least annually.
Maintenance must only be carried out by suitably qualified personnel.
7.4 Replacing the Battery (SL500-BAT/SL510)
B B a a t t t t e e r r y y C C o o v v e e r r
7.5

Storage and Disposal Requirements

1. The Smartsigns® LITE can be transported and stored in the
following environmental conditions:
2. For transport or storage, use the original packaging, including the
inserts, to protect the Smartsigns® LITE.
3. Contact local authorities for disposal requirements for electronic devices
and for lead-acid batteries. Do not throw the battery into domestic
waste.
Do not dispose of batteries in fire as this can cause them to explode.
NOTE:
24
Model Number: SL510
Caution: Subsitution of a component
different from that supplied may result in
measurement inaccuracies
Pb
Manufactured By: Diagnostic Products Division
35 Portmanmoor Road
Cardiff
CF24 5HN
HEALTHCARE
Tel: +44 (0) 29 20485885
Fax: +44 (0) 29 20492520
Email: sales@huntleigh-diagnostics.co.uk
Certified to:
CAN/CSA C22.2 No. 601.1-M90
UL 2601-1:1988
Complies with:
202332
EN 60601-1:1990
Patent Pending
SN
0088
Made in Canada
Temperature range:
Humidity Range:
It is recommended to disconnect the battery if the Smartsigns®
LITE is to be shipped or stored for longer than one month to
prolong the life of the battery.
Remove the two screws
and remove the battery
cover.
Disconnect the battery
and replace with a new
battery. ( Refer to
the'Storage and Disposal
Requirements' section
for battery disposal
instructions.)
Close the battery door
and secure it with the
two screws.
-20 to 50 degrees Celsius
15 to 95 % RH (non-condensing)