Cable Glands; Seal Caps - Feig Electronic OBID i-scan ID ISC.MRU200 Montage / Installation

®
OBID i-scan

3.1 Cable Glands

The different cable glands are shown in Table 3-1.
Table 3-1: ID ISC.MRU200 cable glands
Cable gland Size
1 M 16
2 M 16
3 M 16
4 M 12
5 M 12
6 M 25

3.2 Seal Caps

The seal caps included in the scope of delivery can be used to close off unused cable fittings. This
is necessary for reaching the IP54 class.
The reducing ring provided is intended for the network connection. The slotted reducer is placed
over the network cable and then fixed in place in the cable gland.
FEIG ELECTRONIC GmbH
Installation
Clamping Range
in mm (inch)
4,5...10 (0.18...0.39)
4,5...10 (0.18...0.39)
4,5...10 (0.18...0.39)
3,5...7 (0.14...0.28)
3,5...7 (0.14...0.28)
9...17 (0.35...0.67)
Fig. 3-2: network connection with slotted reducer
Page 34 of 52
Description
Antenna Cable 1
Antenna Cable 2
Inputs / Relay / Outputs
Interface (serial)
Supply voltage
Ethernet Interface (Model –E only)
USB Interface (Model –USB only)
M70201-4de-ID-B.doc
ID ISC.MRU200