Warranty; Storage Conditions; Ec Declaration Of Conformity - Mettler Toledo InPro 8600 i Serie Kurzanleitung

InPro 8600 i Sensors
8

Warranty

On manufacturing defects, 12 months after delivery.
9

Storage conditions

Inspect the instrument immediately after receiving for any
transport damage. The sensor should be stored in a dry,
clean and protected area until the time of installation. If the
sensor has been removed from the process, it should be
thoroughly cleaned and dried. It should be stored in a dry,
clean and protected area until time of installation.
10

EC Declaration of Conformity

The complete declaration is available in the declaration of
conformity certificate.
© 06 / 2019 Mettler-Toledo GmbH
Printed in Switzerland
21
InPro 8600 i Sensors
30 313 251 B
en