Setting A Color System For Your Tv - Yamaha DVD-S663 Bedienungsanleitung

Getting Started
Step 3: Setting a TV type/display
and language
You can customize this unit using the setup
menu displayed on the TV screen.
Note
Unless stated otherwise, all operations described
here are carried out using the supplied remote
control.
y
• To return to the previous menu, press 2.
• If the setting you have selected are not
appropriate, you can reset all settings to the initial
factory settings (see "Resetting the system" on
page 40).

Setting a color system for your TV

This unit is compatible with both NTSC and
PAL video formats. Select the color system
that matches your TV.
VIDEO SETUP PAGE
TV TYPE
TV DISPLAY
PROGRESSIVE
PICTURE SETTING
BLACK LEVEL
CLOSED CAPTION
.......
*
COMPONENT
HDMI SETUP
* : [COMPONENT] is only for Europe and
Russia models.
1
Press SET UP.
2 Press 3 repeatedly to select "VIDEO
SETUP PAGE".
3 Press 5/a to highlight [TV TYPE], and
then press 3.
4
Press 5/a to highlight one of the
following options.
14
En
PAL
NTSC
MULTI
PAL
Select this if the connected TV is a PAL
system TV. It will change the video signals of
NTSC discs and output them in PAL format.
NTSC
Select this if the connected TV is an NTSC
system TV. It will change the video signals of
PAL discs and output them in NTSC format.
MULTI
Select this if the connected TV is compatible
with both NTSC and PAL formats (such as a
multi-system TV).
The output format will be in accordance with
the video signals of the disc.
5
Select an item, and then press ENTER.
6
Press SET UP to exit from the menu.
Notes
• Before changing the current TV standard setting,
ensure that your TV supports the selected TV
type.
• When making HDMI connections, you cannot
change or select [TV TYPE].
y
If the picture is not displayed properly on your TV,
wait for 15 seconds for this unit to activate
automatic recovery.