Repeating A Section Within A Chapter/Track; Zooming Pictures In/Out; Operations For Video Playback (Dvd/Vcd/Svcd); Resuming Playback From The Last Stopped Point - Yamaha DVD-S663 Bedienungsanleitung

Playback Operation
VCD/SVCD/CD
RPT ONE (repeat track)
RPT ALL (repeat all)
SHUFFLE (shuffle)
RPT SHF (shuffle repeat)
RPT OFF (repeat off)
MP3/WMA/WMV/DivX
RPT ONE (repeat file)
RPT FLD (repeat folder)
SHUFFLE (shuffle)
RPT OFF (repeat off)
Note
For VCD/SVCD, repeat playback is not available
when the PBC mode (see "Special VCD/SVCD
features" on page 20) is on.
Repeating a section within a
chapter/track
1
While playing a disc, press REPEAT A-B
at the desired starting point.
"SET A" appears in the front panel
display.
2
Press REPEAT A-B again at the desired
end point.
• A and B can only be set within the same
chapter/track.
"RPT AB" appears in the front panel
display and the selected section repeats
continuously.
3
To exit from the sequence, press REPEAT
A-B.
Operations for video playback
(DVD/VCD/SVCD)
Using the disc menu
Depending on the disc, a menu may appear on
the TV screen once you load the disc.
18
En
®
To select a playback feature or item
Use 2 / 3/5/a or the numeric
buttons (0-9), and then press ENTER to
start playback.
To access or exit from the menu
Press MENU.
Playback in slow motion
You can play back video in slow motion.
1
During playback, press 5 for reverse slow
motion or a for forward slow motion.
2 During slow motion, press 5/a repeatedly
to select the desired speed.
3 To resume normal playback, press 3 / 8.
Note
For VCD and SVCD, reverse slow motion is not
available.

Zooming pictures in/out

You can enlarge or shrink the picture on the
TV screen and pan through the enlarged
picture.
1
During playback, press ZOOM repeatedly
to display the picture at different scales.
Use 2 / 3/5/a to pan through the
•
enlarged picture.
Playback continues.
2
Press ZOOM repeatedly to return to the
original size.
Resuming playback from the last
stopped point
You can resume playback of the last ten discs,
even if the discs were ejected or this unit was
set to the standby mode.