Hdmi Connection - Yamaha DVD-S663 Bedienungsanleitung

HDMI connection

HDMI jack
HDMI (High-Definition Multimedia
Interface) provides high quality digital audio
and video on a single connection.
Connect the HDMI jack of this unit to an
HDMI input jack of your AV receiver, and
then to that of your TV using a commercially
available HDMI cable.
If your receiver does not have an HDMI input
jack, you can achieve a better video image by
connecting the HDMI jack of this unit directly
to the HDMI input jack of your TV.
This unit can display High-Definition JPEG
images (720p, 1080i, or 1080p) when you
connect this unit to an HDTV via the HDMI
jack. For details, see "HD JPEG" on page 37.
This unit (Europe model)
HDMI
HDMI cable
HDMI IN
AV receiver
HDMI OUT
HDMI IN
TV
COMPONENT VIDEO
P / C Y
R R
COAXIAL P / C S VIDEO
B B
AUDIO OUT DIGITAL OUT VIDEO OUT
Notes
• You need to set [HDMI AUDIO] (see page 32)
and [HDMI VIDEO] (see page 36) properly.
• You need to make appropriate audio connections
if the connected component does not output audio
signals (see "Audio connections" on page 9).
• This unit is not compatible with HDCP-
incompatible HDMI or DVI components.
• You need a commercially available HDMI/DVI
conversion cable when you connect this unit to
other DVI components. In this case, the HDMI
jack of this unit does not output any audio
signals.
• Depending on the connected DVI component,
black and white in the image may not be distinct.
In that case, adjust the picture setting of the
connected DVI component.
• Do not disconnect or turn off the power of the
HDMI/DVI component connected to the HDMI
jack of this unit during playback. Doing so may
disrupt playback or cause noise.
y
When connecting an HDMI component, refer to the
manual supplied with your component.
Connections
11
En