Herunterladen Inhalt Inhalt Diese Seite drucken

Video Connections; S-Video Terminal; Composite Video Terminal; Component Video Terminal - Yamaha dvd s550 Bedienungsanleitung

Dvd player
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 69
Preparation

Video Connections

If your AV receiver has video output jacks,
connect your receiver (and then to your
TV) so that you can use one TV for several
different video sources (LD, VCR etc.) by
simply switching the input source selector
of your receiver.
The player has three types of video output
jacks. Use one of them in accordance with
the input jacks of the equipment to be
connected.
(supplied)
<A>
<B>
V
S
Y
P
C
B
B
S VIDEO
VIDEO
COMPONENT
INPUT
VIDEO IN
AV receiver
VIDEO
COMPONENT
S VIDEO
OUT
VIDEO OUT
OUT
VIDEO
COMPONENT
S VIDEO
IN
VIDEO IN
IN
6
<C>
<D>
P
C
R
R
S-Video terminal <A>
S (separate) video connection achieves a
clearer picture than composite video
connection by separating color and
luminance when transmitting signals. Use
commercially available S-video cable.
Receiver (and TV) with S-video input is
required.
Composite Video terminal <B>
Use audio/video cable supplied with this
unit when connecting the player to a TV.
Component Video terminal <C>
Component video connection achieves
high fidelity in reproducing colors (better
performance than S-video connection),
separating video signal into luminance (Y,
terminal color-coded as green), and color
difference (Pb, blue/Pr, red). Use
commercially available coaxial cables.
Receiver (and TV) with component input is
required. Observe the color of each jack
when connecting. If your receiver does not
have component output jacks, connecting
the player's component output directly to
your TV's component input can reproduce
better video image.
Note:
– You need to set this unit's component
output to YUV (see page 23 "Switching the
YUV/RGB").
SCART Connection <D>
If your TV has only terminal for video
input, and you want to connect it directly
to this unit, you can use this unit's SCART
output jack.
Note:
– Ensure that the "TV" indication on SCART
cable is connected to the TV set and "DVD"
indication on SCART cable is connected to
this unit.

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis